Media & Sensor Commands
^MM - Print Mode
Sets tear-off, peel-off, cutter, or rewind mode
^MM - Print Mode
Overview
The ^MM command configures how the printer handles media after printing, supporting tear-off, peel-off, cutter, rewind, and applicator modes.
Syntax
^MMa,bParameters
- a = Print mode
- T = Tear-off
- P = Peel-off
- C = Cutter
- R = Rewind
- A = Applicator
- S = Tear-off with cutter
- b = Prepeel
- Y = Yes, prepeel label
- N = No, standard peel
Description
- Configures label finishing mode
- Determines how media is handled
- Each mode has specific hardware requirements
- Critical for label output configuration
Usage Notes
- Set once at format beginning
- Must match printer hardware
- Affects label output method
- Different modes have different hardware needs
Example
^XA
^MMP,Y
^FO50,50
^ADN
^FDPeel-off Label^FS
^XZMode Reference
| Mode | Hardware | Usage |
|---|---|---|
| T | Tear bar | Standard labels |
| P | Peeler | Peel-off labels |
| C | Cutter | Cut-to-length |
| R | Rewind | Media rewind |
| A | Applicator | Auto-application |
Related Commands
^MT- Media Type^MD- Media Darkness^MN- Media Tracking