CommandsInquiry
~WC - Print Configuration Label
Prints comprehensive printer configuration on label
~WC - Print Configuration Label
Overview
The ~WC command generates and prints a Printer Configuration Label containing comprehensive information about the printer's current settings, installed options, firmware version, memory configuration, and operational parameters. Essential tool for printer setup verification and troubleshooting.
Syntax
~
Parameters
None
Description
- Prints configuration snapshot
- Shows all printer settings
- Includes installed options
- Documents current state
- Physical reference
Examples
Print Configuration Label
~
Label prints when idle.
Configuration Label Contents
Printer Information
- Model and serial number
- Firmware version
- Installed memory (DRAM, Flash, Card)
Communication Settings
- Serial port configuration
- Baud rate
- Parity and handshaking
Print Settings
- Print mode (tear-off, peel-off, etc.)
- Print darkness
- Print speed/rate
- Media type
Sensor Settings
- Media sensor settings
- Ribbon sensor values
- Label length
- Calibration data
Installed Options
- Cutter (if present)
- Applicator (if present)
- Memory cards (if present)
Storage Devices
- DRAM usage
- Flash memory status
- Memory card status
Storage Device Labels
Version 22.8.5+ uses descriptive names:
- E: = Onboard Flash
- B: = Memory Card
- R: = RAM
When to Use
Setup Verification
- After initial configuration
- Verify all settings correct
- Check installed options
Troubleshooting
- Document current state
- Compare with known-good
- Diagnose configuration issues
Maintenance
- Keep with printer
- Track configuration history
- Document changes
Support
- Provide to Zebra support
- Configuration verification
- Problem diagnosis
Important Notes
- Printer must be idle
- Uses one label
- Physical reference
- Comprehensive snapshot
- Essential for setup
Related Commands
~HI- Host Identification~HS- Host Status Return^JU- Configuration Update