CommandsSensor calibration
^JJ - Set Auxiliary Port
Configures auxiliary port for verifier and applicator devices
^JJ - Set Auxiliary Port
Overview
The ^JJ command controls the auxiliary port for online verifier or applicator device integration. Configures output signals for verification error handling and applicator synchronization, enabling print-and-apply and verification workflows.
Syntax
^JJo,aParameters
- o = Operational mode (0=Off, 1=Reprint, 2=Max throughput)
- a = Applicator mode (0-4)
Description
- Controls verifier operation
- Configures applicator signals
- Synchronizes external devices
- Critical for print-and-apply
Verifier Modes
| Mode | Behavior |
|---|---|
| 0 | Off (no signals) |
| 1 | Reprint on error (stops for inspection) |
| 2 | Max throughput (no stop) |
Applicator Modes
| Mode | Signal Behavior |
|---|---|
| 0 | Off |
| 1 | LOW during media motion |
| 2 | HIGH during media motion |
| 3 | LOW pulse (20ms) at label position |
| 4 | HIGH pulse (20ms) at label position |
Examples
Verifier with Reprint
^JJ1,0Applicator Mode 3
^JJ0,3Full Configuration
^JJ2,1Usage Notes
- v18.6.0+
- Modes 1-2: Active during motion
- Modes 3-4: Pulse when positioned
- Mode 2 overrides ^JZ (no reprint)
- Integration device-specific
Related Commands
^JZ- Reprint After Error~JC- Set Media Sensor Calibration